CHEMTEK SC-86 Rust and Scale Remover

Product Features

• Quickly removes rust and scale, saving time and reducing the risk of ignition.
• Effectively removes thick layers of rust.
  
• Dissolves rust and scale by breaking them down into a solution with water.
  
• Contains inhibitors to prevent corrosion, protecting metals such as iron, brass, bronze, rubber seals, and plastics.
• Can be diluted with water up to 4 times depending on the thickness of the rust and scale.
• Application methods include immersion or using a rotating pump.
  
  

Used with the following machinery

 
instruction

Rotating pump

• Mixing the Solution: Prepare the CHEMTEK SC-86 solution by mixing it with water in a ratio of 1:4. This means for every part of CHEMTEK SC-86, use 4 parts of water.
  
• Connecting to the Rotating Pump: Connect the rotating pump to the machinery or equipment that needs cleaning.
  
• Circulating the Solution: Start the rotating pump to circulate the CHEMTEK SC-86 solution throughout the equipment. Let it circulate for 2-3 hours to allow the solution to effectively dissolve rust and scale. If the solution loses effectiveness during this time, consider replenishing it with fresh solution.
• Rinsing with Clean Water: After the circulation period, rinse the equipment thoroughly with clean water until all residues of the cleaning solution are removed.

• Mixing the Solution: Prepare the CHEMTEK SC-86 solution by mixing it with water in a ratio of 1:5. This means for every part of CHEMTEK SC-86, use 5 parts of water.
• Spraying: Use a spray tank to apply the diluted CHEMTEK SC-86 solution evenly over the entire surface area that needs cleaning.
  
• Foaming and Dissolving: As you spray, you may notice foaming occurring as the CHEMTEK SC-86 interacts with rust. Allow the solution to dissolve the rust completely.
• Rinsing: After the rust has dissolved and the cleaning action is complete, rinse the surface thoroughly with clean water to remove any remaining residue.High-Pressure
• Washing: For more stubborn residues or thorough cleaning, you can use a high-pressure washer to rinse off the CHEMTEK SC-86 solution effectively.

Cleaning the rotating parts in a cooling tower and evaporative condenser involves several

• To reduce the water level in the tray of the Cooling Tower and Evaporative Condenser by approximately 20%Add CHEMTEK SC-86 solution to the tray in a ratio of 1 part CHEMTEK SC-86 to 4 parts water in the system.
  
• Turn off the fan of the machine and turn on the water pump. Allow the system to circulate for 1-2 hours. If the solution loses effectiveness, add more.
• Drain the water from the system.
• Refill the system with fresh water and circulate for 10-15 minutes, approximately 2 rounds.Refill the system with fresh water and operate the machine normally.
   
   
   
   

 Video demonstrating the effectiveness of CHEMTEK SC-86